1 - 10
(2) Service mode
Function
Procedures
Remarks
Service test print
See “Service mode operation
procedures” below.
Set a sheet of A4/LTR- or larger-sized paper.
For print sample, see page 1-12.
EEPROM information print
See “Service mode operation
procedures” below.
Set a sheet of A4/LTR- or larger-sized paper.
For print sample, see page 1-13.
EEPROM initialization
See “Service mode operation
procedures” below.
The following items are not initialized:
- USB serial number
- Destination settings (Japan / Overseas)
- Cleaning flag on arrival
- Waste ink counter
Waste ink counter reset
See “Service mode operation
procedures” below.
Both the main and the borderless print waste
ink counters are reset at the same time.
Destination settings
See “Service mode operation
procedures” below.
Overseas:
i470D
Japan:
PIXUS 470PD
Print head deep cleaning
Cleans black and color, simultaneously.
Operation panel display
confirmation
See “Operation panel operation
confirmation procedures ”
below.
Confirm the operations of operation panel
display and operation buttons. Perform the
confirmation at operation panel replacement.
<Service mode operation procedures>
1) Close the access cover, and turn off the printer. While pressing the Resume/Cancel button, press and
hold the Power button. (The LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button.
3) While holding the Power button, press the Resume/Canc el button 2 times, and then release the Power
and Resume/Cancel buttons. (In the operation panel, “02” will be displayed. Each time the
Resume/Cancel button is pressed, the LED lights alternately in either orange or green. During
initialization, the LED blinks in green.)
4) When the LED stops blinking and lights in green, press the Resume/Cancel button the specified number
of time(s) according to the function listed in the table below. (Each time the Resume/Cancel button is
pressed, the LED lights alternately in either orange or green.)
Time(s)
LED
Function
Remarks
0 times Green
Power off
When the print head is not installed, the carriage returns
and locks in the home position.
1 time
Orange
Service test print
When the Power button is pressed during printing, printing
stops, and the mode returns to step 4) above.
2 times Green
EEPROM information print
When the Power button is pressed during printing, printing
stops, and the mode returns to step 4) above.
3 times Orange
EEPROM initialization
4 times Green
Waste ink counter resetting
5 times Orange
Destination settings
Proceed to the following steps 5) and then 6) to set the
destination.
6 times Green
Print head deep cleaning
Cleans black and color, simultaneously.
7 times Orange
Not used in servicing
8 times
or more
Green
Return to the menu selection
Return to step 4) above.
5) After the function (menu) is selected, press the Power button. The LED lights in green, and the selected
function is performed. (When the operation completes, the printer returns to step 4) above.)
<Destination setting>
6) Press the Resume/Cancel button the specified number of time(s) according to the destination listed in
the table below, and then the Power button.
Time(s)
LED
Destination
1 time
Orange
Overseas:
i470D
2 times
Green
Japan:
PIXUS 470PD
Содержание i470D Series
Страница 1: ...i470D i475D SERVICE MANUAL Canon ...
Страница 6: ...Part 1 MAINTENANCE ...
Страница 21: ...Part 2 TECHNICAL REFERENCE ...