Canon HD XS HJ15ex8.5B, Руководство по эксплуатации

Страница: 47 / 118

LENSES
E13 E13
5-1-2. Servo Zoom Operation
In servo zoom operation, pressing the switch drives the motor built-in the lens and performs zoom
operation.
The servo zoom operations are broadly classified into (A) basic operations and (B) automatic playback
operations. A zoom track function is provided to enable operations (A) and (B) to be performed in
combination. The variations of the possible combinations are listed below.
（ A ） BASIC OPERATIONS
1
）
Zoom rocker seesaw operation
2 ） Zoom rocker seesaw ope zoom track function (The function which can limit the control
range to selected positions)
（
B
）
AUTOMATIC PLAYBACK OPERATIONS
3 ） Shuttle shot
4
）
Speed preset
5 ） Framing preset
6 ） Zoom track function
Enjoy combinations of
3), 4), 5), and 6).
}
1
Set the zoom operation change-over knob at the
bottom of the lens drive unit to “ MANU.” position.
2
Turn the zoom ring (itself or with the zoom lever).
Clockwise as viewed from the camera
: to zoom out (to Wide side)
Counterclockwise
: to zoom in (to Tele side)
NOTE
The zoom operation change-over knob must be
set to the “MANU.” position before performing
manual zoom operations.
The lens may be damaged if manual zoom
operations are forcibly performed with the knob
at the “SERVO” position.
5 OPERATION
5-1. ZOOM OPERATION
5-1-1. Manual Zoom Operation
m
п
%
ft
Zoom Ring
Zoom Lever
Tele
Wide
5 OPERATION
MANU.
ZOOM
SERVO
ZOOM
REMOTE1/
VIRTUAL REMOTE2
Zoom Operation
Change-over Knob
SERVO