Canon HD XS HJ15ex8.5B, Руководство по эксплуатации

Страница: 59 / 118

LENSES
E25 E25
To operate the macro, press the macro button to unlock
the macro ring. While holding it down, turn the macro
ring at the rear of the lens clockwise as viewed from
the camera side to allow macro shooting.
1
Set the lens to widest angle by manual or servo
zoom operation.
2
Bring the object into focus by turning the macro
ring.
Macro operation is also possible at any zoom position
other than the widest angle, but the object distance
increases.
EFFECT
V V+H
IS MODE
STD HIGH
m
п
%
ft
M
Macro Ring
Macro Button
5-5. MACRO OPERATION
When the macro function of the lens is used, macro shooting is enabled.
In macro shooting, the object distance becomes shorter than the normal minimum object distance
(M.O.D.).
The minimum object distance by macro operation for this lens is 10mm at widest angle
.
In macro shooting, when zooming to change the focal length, the focal point varies. The multi-point
focus shooting technique uses this characteristic.
The focal point is shifted by the zoom operation.
Follow the steps bellow :
1
Zoom in to a far object, and bring it into focus by normal focus operation.
2
Zoom out to a near object and bring into focus by macro operation.
3
Zoom in to the far object again while not touching the macro button set by above step 2, and bring into
focus again by normal focus operation.
Multi-point Focus Shooting
5 OPERATION