Canon FAXPHONE L100, Руководство по обслуживанию, Страница: 22 / 186

1
1
1-10
1-10
Product Overview > Parts Name > Operation Panel (L150 / L150 CHN / L150 KOR / L154)
Product Overview > Parts Name > Operation Panel (L150 / L150 CHN / L150 KOR / L154)
No. Name Function
[7] [Status Monitor/Cancel]
key
Confirms and cancels a job. Also allows monitoring of this
product's status.
[Back] key Returns to the screen one layer before.
[▲] Key Selects the upper setting item or increases a setting value.
[▼] Key Selects the lower setting item or decreases a setting value.
[◄] Key Returns to the screen one layer before. Or moves the cursor
to the left. Press to lower the volume level when the fax tone is
playing.
[►] Key Proceeds to the screen one layer after. Or moves the cursor to
the right. Press to raise the volume level when the fax tone is
playing.
[OK] key Determines settings and registered data.
[Reset] key Resets settings.
[8] [Processing/Data] lamp Blinks in green when this product is running. Lights up in green
when a job is waiting.
[Error] lamp Blinks in orange when an error occurs. Or lights up in orange
instead.
[9] [Hook] key Push to dial with the telephone receiver of the external phone
on the hook.
[10] [Pause] key Inserts a pause in the fax number.
[11] [One-touch Speed Dial]
keys
Specifies the destination registered to the One-Touch Dial
1-30..
[12]
[13] Onetouch Cover
By opening the Onetouch Cover, one-touch dials 16 to 30 are
enabled.
T-1-5
Operation Panel (L150 / L150 CHN / L150 KOR / L154)
[2] [3] [1] [4] [5] [6]
[7] [8] [10] [11] [9]
No. Name Function
[1] [Redial] key Calls up the destination of last transmission. (This is enabled
only when the fax basic screen is displayed.)
[2] [Address Book] key Searches the destination registered to One-Touch Dial and
Coded Dial by name.
[3] [Coded Dial] key Specifies the destination registered to the Coded Dial.
[4] [FAX/COPY] key Switches the mode between copy and fax.
[5] LCD Displays a message or operation status. Displays menu,
selected item, texts, numbers and other information when
changing settings.
[6] [Menu] key Registers various settings.
[Paper Settings] key Specifies the paper size and type to place in the pickup tray.
[Report] key Prints a report and list. Also allows to set whether to
automatically print a report.
[Clear] key Deletes a text or number.
[Energy Saver] key/lamp Manually sets and cancels energy saver mode.Lights up in
green when in the energy saver mode.
Numeric keys ([0]-[9]) Enters a text or number.
[*] key Switches the text entry mode. Use to send the tone signal from
the dial line when sending fax.
[#] key Use to enter a signal.
[Stop] key Stops the job.
[Start] key/lamp Starts copy or fax operation.Lights up in green when a copy or
fax operation is in starting state.
F-1-9