Canon FAXPHONE L100, Руководство по обслуживанию, Страница: 175 / 186

8
8
8-12
8-12
Service Mode > FAX > Setting of NCU Parameters > BUSTONE1
Service Mode > FAX > Setting of NCU Parameters > BUSTONE1
Parameter No. Function Setting range
005; T4 timer 0 to 9999 (x 10 msec)
006; Signal detection table 0 to 16
007; Signal detection level 0 to 7
008; Number of signal frequency 0 to 9999
■ 2ND DTN
● Bit Switch
Bit No. Function 1 0
Bit 0 Frequency detection method Modem Tonal counter
Bit 1 Not in use - -
Bit 2 Signal frequency Changed Not changed
Bit 3 Not in use - -
Bit 4 Judgment of intermittent signal start from valid ON signal start from either valid ON
signal or OFF signal
Bit 5 Not in use - -
Bit 6 Signal form Continuous Intermittent
Bit 7 Signal detection Detected Not detected
● Numeric value parameter
Parameter No. Function Setting range
001; T0 timer 0 to 9999 (x 10 msec)
002; T1 timer 0 to 9999 (x 10 msec)
003; T2 timer 0 to 9999 (x 10 msec)
004; T3 timer 0 to 9999 (x 10 msec)
005; T4 timer 0 to 9999 (x 10 msec)
006; Signal detection table 0 to 16
007; Signal detection level 0 to 7
008; Number of signal frequency 0 to 9999
T-8-25
T-8-26
T-8-27
■ BUSTONE0
● Bit Switch
Bit No. Function 1 0
Bit 0 Not in use - -
Bit 1 Not in use - -
Bit 2 Signal frequency Changed Not changed
Bit 3 Not in use - -
Bit 4 Judgment of intermittent signal Start from valid ON signal Start from either valid ON
signal or OFF signal
Bit 5 Not in use - -
Bit 6 Signal form Continuous Intermittent
Bit 7 Signal detection Detected Not detected
● Numeric value parameter
Parameter No. Function Setting range
001; Not in use -
002; T1 timer 0 to 9999 (x 10 msec)
003; T2 timer 0 to 9999 (x 10 msec)
004; T3 timer 0 to 9999 (x 10 msec)
005; T4 timer 0 to 9999 (x 10 msec)
006; Signal detection table 0 to 16
007; Signal detection level 0 to 7
008; Number of signal frequency 0 to 9999
■ BUSTONE1
● Bit Switch
Bit No. Function 1 0
Bit 0 Not in use - -
Bit 1 Not in use - -
Bit 2 Signal frequency Changed Not changed
Bit 3 RBT signal detection Detected Not detected
Bit 4 Judgment of intermittent signal start from valid ON signal start from either valid ON
signal or OFF signal
Bit 5 RBT signal check cycle 1cycle 1/2 cycle
Bit 6 Signal form Continuous Intermittent
Bit 7 Signal detection Detected Not detected
T-8-28
T-8-29
T-8-30