Canon FAXPHONE L100, Руководство по обслуживанию, Страница: 172 / 186

8
8
8-9
8-9
Service Mode > FAX > List of SSSW
Service Mode > FAX > List of SSSW
FAX
List of SSSW
FAX > SSSW
SSSW No. Bit No. Function
SW 01
（
Errors, Copy functions
）
Bit 0 Output error codes for service technicians
Bit 1 - 7 Not in use
SW 02 (Setting for network connection criteria)
Bit 0 Do not start when memory clear list is unable to output
Bit 1 - 3 Not in use
Bit 4
V34 CCRTN OFF
Bit 5 - 6 Not in use
Bit 7
Connect the terminal as F network type 2
SW 03 (Echo measures)
Bit 0 Check EQM of TCF
Bit 1 Apply echo protect tone to V.29
Bit 2 - 6 Not in use
Bit 7
Output 1080Hz before CED
SW 04 (Measures against communication troubles)
Bit 0 Not in use
Bit 1 Check CI signal frequency
Bit 2 V21 end flag
Bit 3 Prohibit T.30 node F kept by both parties
Bit 4 T.30 node F echo timer
Bit 5 Check CI signal frequency when setting PBX
Bit 6 Do not send CNG for manual outgoing transmission
Bit 7 Do not send CED for manual incoming transmission
SW 05 (Standard functions, DIS signal setting)
Bit 0 Not in use
Bit 1 mm/inch conversion (text mode)
Bit 2 mm/inch conversion (text and picture / picture mode)
Bit 3 Prohibit DIS from transmitting bit33 and the followings.
Bit 4 Declare cut sheets
Bit 5 - 7 Not in use
SW 06 (Setting of reading criteria)
Bit 0 - 3 Not in use
Bit 4
Reading width 0:A4 1: LTR
Bit 5 - 7 Not in use
SW 07 - SW 11
Bit 0 - 7 Not in use
FAX > SSSW
SSSW No. Bit No. Function
SW 12 (Page timer setting)
Bit 0 1 page timeout (outgoing transmission)
Bit 1
Bit 2
1 page timeout (HT transmission)
Bit 3
Bit 4
1 page timeout (incoming transmission)
Bit 5
Bit 6
Not in use
Bit 7 1 page timeout
SW 13 -
Bit 0 - 1 Not in use
Bit 2
Convert mm/inch when transmitting received image
Bit 3 - 7 Not in use
SW 14 -
Bit 0 - 1 Not in use
Bit 2
Convert inch to mm in both main/vertical scanning directions or only in
vertical scanning direction
Bit 3 Not in use
Bit 4 Declare resolution for Inch series
Bit 5 - 7 Not in use
SW 15
Bit 0 - 1 Not in use
Bit 2
Receive incoming calls to ND circuit: device circuit
Bit 3 - 5 Not in use
Bit 6
Detect continuous signals when switching F/T
Bit 7 Not in use
SW 16 - SW 17
Bit 0 - 7 Not in use
SW 18 -
Bit 0 Detect carrier disconnection between DCS and TCF
Bit 1 Waiting time for carrier disconnection between DCS and TCF
Bit 2 Prohibit communication control for IP network
Bit 3 - 7 Not in use
SW 19 - SW 21
Bit 0 - 7 Not in use
SW 22
Bit 0 Prohibit NSX transmission
Bit 1 - 2 Not in use
Bit 3
Prohibit manual polling actions
Bit 4 - 7 Not in use
SW 23 - SW 24
Bit 0 - 7 Not in use