8-4
Replacing the ink film__________________________
Replace the ink film when a printout is blank or <SET INK FILM> appears in the LCD display.
4
Wipe the scanner area and the rollers with a hard-squeezed moistened cloth.
When cleaning the glass part on the scanning area, flip the green-colored levers up, then insert a thin
cloth into the interspace between the rollers and the glass parts. After finishing, flip the levers back to
the original position.
5
Follow steps 4 to 5 in Installing the ink film on p. 1-5, and close the operation panel.
6
Plug in the power cord.
7
<DATE & TIME> appears in the LCD display.
Follow the steps in Setting the date and time on p. 1-4.
• Do not wipe the recording head with a moistened cloth.
• Be sure to use a soft cloth to avoid scratching the scanning area. If the part has scratches, lines will
be printed on the document surface.
1
Lift the operation panel gently until it locks into position.
Rollers
Recording
head
Release lever
Scanner area
Release lever
Open lever