Canon FAX-L350, Руководство по обслуживанию

Страница: 79 / 213

2-22
FAX-L350 Chapter 2: Technical Reference
6. COMMUNICATION SYSTEM OPERATIONS
6.1 FAX/TEL Switching
This fax is set to automatically switch between fax and telephone, on the same telephone line. If the other
party is a fax, the fax is received automatically, and if the other party is a telephone, the alarm in the main unit
is rung to alert the user. This fax sends a pseudo-RBT to the sender during FAX/TEL switching. It sounds a
pseudo-bell when the other party is a telephone.
6.1.1 Settings
(1) Press the
Receive MODE
button to select
Fax/Tel mode
.
(2) Set the parameters in
“Receive Mode”
menu.
6.1.2 Parameters
Item Default Setting Selection
setting switch range
RING START TIME
8 sec User data 0 to 30 sec
(Pseudo Ring start time)
F/T RING TIME 22 sec User data 10 to 60 sec
(Pseudo Ring time)
F/T SWITCH ACTION RECEIVE User data RECEIVE/
(Operation after FAX/TEL switching) DISCONNECT
Pseudo RBT frequency 400 Hz None None(fixed)
Pseudo RBT transmission from CML 4 sec Service data #3 16 0 to 9 sec
on time until start (CNG detection time)
Pseudo RBT pattern on time 1000 ms Service data #3 17 0 to 9990 ms
Pseudo RBT pattern off time (short) 0 ms Service data #3 18 0 to 9990 ms
Pseudo RBT pattern off time (long) 4000 ms Service data #3 19 0 to 9990 ms
Pseudo RBT transmission level -10 dBm Service data #3 24 -15 to 0 dBm
Pseudo ring frequency 25 Hz Service data #2 10
17 Hz/25 Hz/50 Hz
Pseudo ring pattern on time 1000 ms Service data #3 20 0 to 9990 ms
Pseudo ring pattern off time (short) 0 ms Service data #3 21 0 to 9990 ms
Pseudo ring pattern off time (long) 4000 ms Service data #3 22 0 to 9990 ms