Canon FAX-L350, Руководство по обслуживанию

Страница: 151 / 213

3-40
FAX-L350 Chapter 3: Maintenance and Service
#1 SSSW (service soft switch setting)
SW28 (service soft switch 28: V.8/V.34 protocol settings)
Bit
Function 1 0
0 (New) Caller V.8 protocol No Yes
1 (New) Called party V.8 protocol No Yes
2 (New) Caller V.8 protocol late start No Yes
3 (New) Called party V.8 protocol late start No Yes
4 (New) V.34 reception fallback Prohibited Not prohibited
5 (New) V.34 transmission fallback Prohibited Not prohibited
6 Not used
7 Not used
[Bit 0]
Select whether to use the V.8 protocol when calling. If No is selected, the V.8 protocol is inhibited at
calling and the V.21 protocol is used.
[Bit 1]
Select whether to use the V.8 protocol when calling. If No is selected, the V.8 protocol is inhibited when
called and the V.21 protocol is used.
[Bit 2]
If ANSam signal is not received during transmission, select whether to use the V.8 protocol when the
other fax machine declares the V.8 protocol in DIS signal. If No is selected, the CI signal is not trans-
mitted and the V.8 protocol is not used even if the DIS that specifies the V.8 protocol is received.
The V.8 late start is not executed during manual transmission regardless of this setting.
[Bit 3]
Select whether to declare the V.8 protocol in DIS signal for reception. If No is selected, the V.8 protocol
cannot be used because it is not declared in DIS signal.
The V.8 late start is not executed during manual reception regardless of this setting.
[Bit 4]
Select whether the receiver falls back V.34 reception. If Prohibited is selected, the receiver does not fall
back.
[Bit 5]
Select whether the transmitter falls back V.34 transmission. If Prohibited is selected, the transmitter
does not fallback.