Canon FAX-JX300 Скачать руководство пользователя страница 43

Страница: 43 / 87

Using TAM Mode (FAX-JX500/JX300 only)

Deleting Messages

Press [Menu].

Use [

{

] or [

}

] to select <MSG REGISTRATION>, then press [Start/Copy].

Use [

{

] or [

}

] to select the type of message you want to delete, then press [Start/

Copy]. The LCD displays <PLAY>.

Use [

{

] or [

}

] to select <DELETE>, then press [Start/Copy].

Press [Stop].
The fax returns to standby mode.

Playing Telephone Messages

Telephone messages will be played back in order from the oldest message recorded. If a voice
memo has been recorded, it will be played back first.

Press [Play].

The day and time when the telephone message was recorded, the number of telephone
messages and the number of the message being played (ICM No.) are displayed whenever a
message is played.

Follow the procedures below to delete all messages.

Press [Delete]. The LCD displays <YES=( ) NO=(#)>.

Press [ ] to delete all messages.

A voice memo is not deleted (see page 41).

If you decide not to delete all messages, press [#].

Note

You cannot delete the <OUTGOING MESSAGE>. The old outgoing message will be automatically

deleted when you record your new message.

Note

Press [

] to listen to the message again. (Repeat)

Press [

] to play the next message. (Skip)

Press [

] twice to play the previous message.

Press [Stop] to stop playback.

Press [Delete] during playback to delete a message.

Use [

{

] or [

}

] to change the volume.

SUN 17:15

02/05

Содержание FAX-JX300
























































































Результаты поиска

Содержание FAX-JX300

Отзывы:

Похожие инструкции для FAX-JX300

Бренды по названию

Популярные бренды

Canon FAX-JX300, Руководство пользователя

Результаты поиска

Содержание FAX-JX300

Отзывы:

Похожие инструкции для FAX-JX300

Бренды по названию

Популярные бренды