Canon EOS C70, Инструкция по эксплуатации

Страница: 67 / 215

67
White Balance
Cu s tom White Balance
1 S elect the
Å
A or
Å
B icon (
A
66).
• To apply the stored custom white balance setting as is, the rest
of the procedure is not necessary. To set a new custom white
balance, continue the procedure.
2 Point the camera at a gray card or white object s o that it fill s
the center of s creen.
• Use the same lighting conditions you plan to use when
recording.
3 Pre ss the
Å
button.
• The
Å
A or
Å
B icon will flash quickly.
• Make sure the gray card or white object fills the center of the screen until the procedure is completed.
• Once the icon stops flashing, the procedure is completed. The setting is retained even if you turn off the
camera.
NOTES NOTES
• Readjust the custom white balance if the light source or ND filter setting changes.
• Very rarely and depending on the light source,
Å
may keep flashing (it will change to a slow flashing). In that
case, change the subject brightness and adjust the custom white balance again.
• After the camera registers a custom white balance, the color temperature or CC value may appear in gray. This
indicates that the value registered exceeds the range of values that can be displayed but the white balance is
correctly calibrated and you can continue shooting.
Color Temperature/Pre s et White Balance
1 S elect the
¼
or
É
icon (pre s et white balance), or the
È
icon (color temperature s etting) (
A
66).
• To apply the stored preset setting or color temperature as is, the
rest of the procedure is not necessary. To adjust the color
temperature or CC value, continue the procedure.
2 Pre ss the
Å
button.
• The camera will enter the direct setting mode with the color
temperature highlighted in orange. To adjust the CC value, push
the joystick right.
• You can also adjust the color temperature or CC value using direct touch control (
A
49).
3 S elect the de s ired value.
• The selected color temperature and CC value will be set and will appear on the screen next to the white
balance icon.
White balance mode/setting
Adjustment range
Color temperature (K) Color compensation (CC) value
¼
(daylight) 4,300 K to 8,000 K
–5 to +5
É
(tungsten lamp) 2,700 K to 3,700 K
È
(color temperature) 2,000 K to 15,000 K –20 to +20