Canon EOS C70, Инструкция по эксплуатации

Страница: 189 / 215

189
Trouble s hooting
If you change thi s s etting, you will not be able to u s e the current Look File.
- The Loo k File’ s adju s tment s to the image quality cannot be applied becau s e the [Gamma/Color S pace], [HLG Color],
[Over 100%] s etting s in the cu s tom picture file are different from tho s e regi s tered with the Loo k File. Change the s e
s etting s or regi s ter a different Loo k File.
Invalid operation
- The following are not valid operation s and cannot be performed.
• In MEDIA mode, during playbac k , trying to add a s hot mar k to a frame that ha s one already.
• Trying to add an
$
mar k and a
%
mar k to the s ame clip.
• Pre ss ing the REC button when no card s are in s erted in the camera.
Len s error Turn the camera off, then on again.
- There wa s a communication error between the camera and the len s . Turn the camera off and then on again.
Len s firmware update Firmware update failed. Try updating again.
- The len s ’ s firmware could not be correctly updated. Try updating the firmware again.
Low Power Warning Check the power s upply.
- The input power s upplied to the camera (DC IN terminal) ha s reached the level s et for the power level warning
(
A
172). Chec k the power s ource.
- The me ss age appear s every time you pre ss the REC button when the power s upply i s too low (a s de s cribed above).
Management file error
- Cannot record becau s e the camera cannot write to the file control information. Thi s may occur if the file s on the card
were acce ss ed u s ing another device. S ave your recording s and initialize the card (
A
32).
May not be po ss ible to record clip s on thi s media
- The card u s ed doe s not meet the camera' s requirement s . U s e a recommended card (
A
31).
Media full
- The card i s full. Replace the card or delete recording s (
A
126) to free s ome s pace on the card.
- Recording will not s tart becau s e the card i s full. S witch to the card in the other card s lot to record.
Media i s almo s t full
- Available s pace on one or both card s i s in s ufficient a s de s cribed below. Replace the relevant card( s ) or delete
recording s (
A
126) to free s ome s pace on the card.
• During normal recording, the s pace available on the card being u s ed for recording i s low.
• During relay recording, the combined s pace available on card s A and B i s low.
• During s ub recording or double s lot recording, the s pace available on card A or B (the fulle s t one) i s low.
• During proxy recording, the s pace available on card A (primary clip s ) i s low. Otherwi s e, when recording only on card
B (proxy clip s ), the s pace available on card B i s low.
• During continuou s recording, the s pace available on card B (continuou s ) i s low.
Memory card i s write-protected
- The LOCK s witch on the S D card i s s et to prevent accidental era s ure. Change the po s ition of the LOCK s witch.
Mount Adapter firmware update Firmware update failed. Try updating again.
- The mount adapter’ s firmware could not be correctly updated. Try updating the firmware again.
No clip s
- There are no clip s of the s elected video format on the s elected card.
No photo s
- There are no photo s on the S D card.
Number of clip s already at maximum
- The card s elected for recording already contain s the maximum number of clip s (999 clip s ). Replace the card or u s e the
card in the other card s lot.
- Becau s e both card s reached the maximum number of clip s , double s lot recording i s not available.
Number of Shot Mark s at maximum
- The s hot mar k could not be added becau s e the clip already contain s 100 s hot mar ks .
Power Zoom Adapter Check the power s upply.
- The power zoom adapter’ s remaining battery charge i s low. Replace the power zoom adapter’ s batterie s .
Power Zoom Adapter Temperature too high. Cannot perform ta s k.
- The power zoom adapter cannot be operated becau s e it s temperature i s too high. S top u s ing the power zoom adapter
and let it cool down before u s ing it again.