Canon EOS 5D Mark II, Инструкция по эксплуатации

Страница: 97 / 260

97
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±2 stops in 1/3-stop increments for three
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing.
1
Select [Expo. comp./AEB].
Under the [
2
] tab, select [ Expo.
comp./AEB ], then press < 0 >.
2
Set the AEB amount.
Turn the < 6 > dial to set the AEB amount.
You can set the exposure compensation
amount with the <
5 > dial. If AEB is
combined with exposure compensation,
AEB will be applied centering on the
exposure compensation amount.
Press < 0 > to set the amount.
X When you exit the menu, <
h
> and the AEB level will be displayed
on the LCD panel.
3
Take the picture.
Focus and press the shutter button
completely. The three bracketed shots will
be taken in this sequence: Standard,
decreased, and increased exposure.
Follow steps 1 and 2 to turn off the AEB amount display.
AEB will be canceled automatically when you set the power switch
to <
2
> or when the flash is ready to fire.
h
Auto Exposure Bracketing (AEB)
N
AEB amount
Canceling AEB
If the drive mode is set to <
u
>, you must press the shutter button three
times. When <
i
> is set and you hold down the shutter button
completely, three shots will be taken continuously, then the camera will
stop shooting. When <
Q
> or <
k
> is set, the three bracketed shots
will be taken after a 10-sec. or 2-sec. delay.
Neither flash nor bulb exposures can be used with AEB.
COP
Y