Canon EOS 5D Mark II, Инструкция по эксплуатации

Страница: 38 / 260

38
The shooting settings are displayed on the LCD monitor where you can
quickly select and set the functions. This is called the Quick Control
screen.
1
Display the Quick Control screen.
Press <
9
> straight down.
X The Quick Control screen will appear.
(
)
2
Set the desired setting.
Use <
9
> to select a function.
In the <
1
> (Full Auto) mode, you
can select certain drive modes (p.85)
and the image-recording quality
(p.54).
X A brief description of the selected
function is displayed on the screen’s
bottom.
Turn the < 5 > or <
6
> dial to
change the setting.
3
Take the picture.
Press the shutter button completely to
take the picture.
X The LCD monitor turns off and the
captured image is displayed.
9
Using the Quick Control Screen
1
(Full Auto)
d
/
s
/
f
/
a
/ F
If [ 8 C.Fn III -3: AF point selection method ] is set to [ 1: Multi-controller
direct ], the Quick Control screen cannot be displayed (p.198).
Regarding the <
C
> (Creative Auto) mode, see page 51.
COP
Y