manualshive.com logo in svg

Canon EOS 5D Mark II, Инструкция по эксплуатации

Поделиться
Скачать
Canon EOS 5D Mark II Скачать руководство пользователя страница 117

117

Using AF to Focus

The image sensor is used to focus. Although AF is possible with the 
Live View image displayed, 

the AF operation will take longer than 

with Quick mode

. Also, achieving focus may be more difficult than with 

the Quick mode.

1

Move the AF point.

 

Use <

9

> to move the AF point < > 

to where you want to focus. (It cannot 
go to the edges of the picture.)

 

If you press <

9

> straight down, the 

AF point will return to the image 
center.

2

Focus the subject.

 

Aim the AF point over the subject, 
and hold down the <

p

> button.

X

When focus is achieved, the AF point 
will turn green and the beeper will 
sound.

X

If focus is not achieved, the AF point 
will turn orange.

3

Take the picture.

 

Check the focus and exposure, then 
press the shutter button to take the 
picture (p.110).

Live Mode: 

AF point

COP

Y

Содержание EOS 5D Mark II





































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды