manualshive.com logo in svg

Canon EOS 5D Mark II, Инструкция по эксплуатации

Поделиться
Скачать
Canon EOS 5D Mark II Скачать руководство пользователя страница 118

118

Using AF to Focus

With the same AF method as the Live mode, human faces are detected 
and focused. Have the target person face the camera.

1

Point the camera toward the 
subject.

 

When a face is detected, a <

p

> 

frame will appear over the face to be 
focused.

 

If multiple faces are detected, <

> 

will be displayed. Use <

9

> to move 

the <

> frame over the target face.

2

Focus the subject.

 

Press the <

p

> button to focus 

the face covered by the <

p

> frame.

X

When focus is achieved, the AF point 
will turn green and the beeper will 
sound.

X

If focus is not achieved, the AF point 
will turn orange.

 

If a face cannot be detected, the AF 
point < > will be displayed and AF 
will be executed at the center.

3

Take the picture.

 

Check the focus and exposure, then 
press the shutter button to take the 
picture (p.110).

Live

u

 (Face Detection) Mode: 

COP

Y

Содержание EOS 5D Mark II





































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды