manualshive.com logo in svg

Canon EOS 5D Mark II, Инструкция по эксплуатации

Поделиться
Скачать
Canon EOS 5D Mark II Скачать руководство пользователя страница 203

203

3

 Custom Function Settings

N

C.Fn IV -5     Focusing Screen

If you change the focusing screen, change this setting to match the 
focusing screen type. This is to obtain the correct exposures.

0: Eg-A
1: Eg-D
2: Eg-S

About focusing screen characteristics

Eg-A: Standard Precision Matte

Standard focusing screen that comes with the camera. Provides 
good viewfinder brightness and enables easy manual focusing.

Eg-D: Precision Matte with grid

This is the Eg-A with a grid. It makes 
it easier to align horizontal or vertical 
lines.

Eg-S: Super Precision Matte

Focusing screen which makes manual focusing easier than with 
the Eg-A. Effective for users who mainly focus manually.

About Super Precision Matte Eg-S and Maximum Lens Aperture

 

This focusing screen is optimized for f/2.8 and faster lenses.

 

If the lens is slower than f/2.8, the viewfinder will look darker than with 
Eg-A.

 

Even if all the Custom Functions are cleared, this setting will be retained.

 

Since the standard Eg-A focusing screen comes with the camera, C.Fn 
IV -5-0 is already factory set.

 

To change the focusing screen, refer to the instructions that come with 
the focusing screen.

 

The C.Fn IV -5 setting is not included in the registered camera user 
settings (p.206).

COP

Y

Содержание EOS 5D Mark II





































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды