Canon DU7-1178-000 Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 122

Canon DU7-1178-000 Скачать руководство пользователя страница 94

Chapter 4

4-17

4.3.7 Box Transmission errors

0008-5758

<BOX transmission error message and error code list>

T-4-7

4.3.8 Box Backup Restore Status

0011-4144

Backup

T-4-8

Restore

T-4-9

Message

Error code Cause

Remedy

No message

#022

Address deleted or invalidated during
transmission reservation.

- Retransmit deleted address.
- Check that a group address is specified as
the transfer destination and that it contains a
valid address.
- Check that a group address is specified as
the transfer destination and whether it
contains local print or fax box only.
- Check whether the specified transfer
destination address has been deleted.

Transmission
cancelled

#099/ #995 - Transmission cancelled by user.

Resend.

Address table
not available.

#706

- Address table being imported/ exported
from RUI.
- Address book usage doubled up with
other transmission component (Fax, etc.).

- Quit access from RUI.
- Wait a while and then retry

No message

#711

Full in memory for User Inboxes

Delete stored documents in Mail Boxes.

No message

#712

The number of documents for a box
reaches to the maximum

Delete stored documents in Mail Box that
contains the maximum number of documents.

Backup Status
Messages

Message

Meaning

Comment

Ready

Backup operation can be performed

Default value

Backing up

Executing a backup

Backup Complete Backup completed successfully
Network Error

An error occurred at the backup server
during the backup. The backup failed.

Error caused by the server
Server network fault

Device Error

An error occurred at the iR device during
the backup. The backup failed.

Error caused by the iR device
Hard drive read failure
Workspace memory allocation failure

Restore Status
Messages

Message

Meaning

Comment

Ready

Restore operation can be performed

Default value

Restore
instruction
pending for next
restart

Restore instruction has been made

Restore Complete Previous restore result completed

successfully

Network Error

Previous restore result ended on a network
error on the server side

Error caused by the server
Server network fault
Backup data does not exist at specified path
Backup data does not match restore destination model
Backup data fault

«
...
92
93
94
95
96
...
»

Содержание DU7-1178-000



























































































































Отзывы:

Нет отзывов