manualshive.com logo in svg

Canon DU7-1178-000, Руководство по обслуживанию, Страница: 93 / 122

Поделиться
Скачать
Canon DU7-1178-000 Скачать руководство пользователя страница 93

Chapter 4  

4-16

4.3.6 NCP Transmission errors

0008-4686

<NCP transmission error message and error code list>

T-4-6

Message

Error code Cause

Remedy

No message

#022

Address deleted or invalidated during 
transmission reservation.

- Retransmit deleted address.
- Check that a group address is specified as the 
transfer destination and that it contains a valid 
address.
- Check that a group address is specified as the 
transfer destination and whether it contains local 
print or fax box only.
- Check whether the specified transfer 
destination address has been deleted.

Transmission 
cancelled

#099/ #995 - Transmission cancelled by user. 

Resend.

Address does 
not appear in 
address list.  

#704

- An error occurred when address 
information was being obtained from the 
address list.  (Address deleted from list after 
scanning, etc.)

- Check address list settings. Or, turn unit OFF/
ON.

HD full

#702

Operation stopped because HD full (work 
area).

- Wait a while then retry.  Stop broadcast 
transmission with other protocols.  This 
sometimes helps to avoid this problem.

HD full

#703

Operation stopped because HD full (image 
area).

- Wait a while then retry.  Stop broadcast 
transmission with other protocols.  This 
sometimes helps to avoid this problem.

Address table 
not available. 

#706

- Address table being imported/ exported 
from RUI.  
- Address book usage doubled up with other 
transmission component (Fax, etc.).

- Quit access from RUI.
- Wait a while and then retry

No response

#751

- Server has not booted up.
- Network disconnected.  (If connection 
cannot be made with transmission 
destination, connection is sometimes cut 
mid-way.)
- No Tree name entered.
- Reset caused by internal error.  Processing 
interrupted. 

- Check transmission destination and network 
settings.
- Enter Tree name.
- Transmission jobs whose processing has 
stopped for some reason or other are forced to 
quit by assigning an internal error code (#751).  
As a result, after rebooting, the job is not run. 

Net Ware 
error

#756

NetWare option is turned off in Additional 
Functions.

Turn NetWare option on in Network Settings, 
System Settings, Additional Functions.

Check server #801

- Error generated due to cause on server 
side.
- In NetWare, a user exists but no read or 
write privileges.
- Transmission made to write-prohibited 
file of the same name. 

- Reset server.
- Check server status and settings. 
- Check the network traffic.

Check 
address

#804

- No match for specified directory name.
- No access privileges to the directory.

- Check that the destination directory name is 
correct.
- Set directory access privileges in the server. 
- Send to different directory with access 
privileges. 

Check 
address.

#806

- Wrongly specified user name.
- Wrongly specified password.
- In NetWare, the host name is incorrect. 

- Change address book user name or password.

No message

#807

No access rights for the specified directory - Check the access rights to the server.

No 
connection

#815

- Login is made from this unit in NetWare's 
Pserver mode (NDS/ Bindery common) and 
login is attempted again for NCP, while the 
server is printing.

- Wait a while and try again.
- Change the destination NetWare server.
- Stop Pserver.

Содержание DU7-1178-000



























































































































Отзывы:

Нет отзывов