Canon DU7-1178-000, Руководство по обслуживанию, Страница: 23 / 122

Chapter 2
2-7
2.1.5 Up to 50 mm of Gutter
0011-3460
Up to 50 mm of the gutter can be specified. The gutter can be adjusted within a range from 0 mm to 50
mm in 1 mm increments. The local UI and the print driver have the controls for the gutter settings.
The image is shifted to the width value specified for gutter, making a margin. If the shift causes the image
to overflow from the printable area, the overflowing area is missing from the print results. The overflow-
ing image will not be reduced to fit into the printable area.
F-2-8
F-2-9
The gutter width range changed to 0-50 mm.
US: 0.0 to 2.0 inches
UK: 0.0 to 50.0 mm
2.1.6 Processing on System
0011-3461
Processing after Power Shutdown
If the power is shut down during PDL data processing, all the image data temporarily stored in the hard
disk drive to be printed or stored in Mail Boxes are destroyed and the jobs are canceled. PDL data stored
in the hard disk drive immediately before a power shutdown are destroyed as the power is shut down.
Processing the data of those, therefore, will not resume when the power is turned on after the shutdown.
Jobs interrupted by a power shutdown will be displayed in the Log list with the End Code "NG (#852)."