Canon DU7-1178-000 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 122

Canon DU7-1178-000 Скачать руководство пользователя страница 82

Chapter 4

4-5

Check TCP/IP

#755

- IP address set to
0.0.0.0. In the following
two situations, the IP
address is 0.0.0.0.
1) Address could not be
obtained from DHCP,
BOOTP, RARP.
2) Unit launched in IP
fixed mode(keys 1+7 to
enter FIXIPmode).
- TCP/IP protocol stack
resources insufficient.
Even with internal retry
(5 times), transmission
failed.

- Set the IP address correctly or set DHCP, RARP, BOOTP
environments to operate properly.
- Turn power OFF/ON.

Check server

#801

SMTP protocol error/
command timeout

- Check mail server
- Check the network traffic.

Cannot find
server

#802

DNS/SMTP setting
error(DNS error)

Reprogramme the user mode settings. (domain name, E-Mail
address, DNS, mail server)

Check address

#806

Incorrect address
(address wrongly
searched on SMTP
protocol)

Check address

POP server
connection error

#810

Cannot connect to POP
server when attempting
POP Before SMTP
transmission.

- Reprogramme user mode settings (POP, DNS server name)
- Check POP server operation.
- Check DNS server operation.

POP server
address error

#813

Password, user account
error when attempting
POP Before SMTP
transmission.

- Check POP user name, password.
- Check POP server account.

No display

#830

DSN error notification
received. The DSN error
notification is sent to the
transmission source by
the SMTP server and the
iR machine programmed
for SMTP reception
during an ESMTP-
enabled transfer path
whenever the destination
address and the other
party's conditions
settings are wrong, or
when the transmitted
document's data size
exceeds the permitted
SMTP server range.

- Check the destination address.
- Set the transmission data size so that it does not exceed the
SMTP server's limit.
- Programme the transmission other party's conditions so that
they can be processed by the receiver.

No display

#834

MDN error notification
received. The MDN
error notification is sent
to the transmission
source as a transmission
result in the mail header
when the final
processing of a mail sent
in I-Fax Full mode fails
in the iR reception
machine.

- Programme the transmission other party conditions so that
they can be processed by the receiver.
- Check that the receiver memory is not full.
- Correct the cause of reception image decoding failure.

Message

Error code Cause

Remedy

«
...
80
81
82
83
84
...
»

Содержание DU7-1178-000



























































































































Отзывы:

Нет отзывов