Canon DP-V2420 Скачать руководство пользователя страница 16

Страница: 16 / 108

Installation/Connection

Procedures to attach/detach stands

The main unit comes with two stands which can be detached. The position where the front stand is attached can be
changed.

CAUTION

•  Use a flat, clear surface when attaching/detaching the stands.
•  The display can tip over if the stand has not been attached.
•  Avoid touching the screen during this step as it may damage it.

■

Detaching

1. Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the

display.

2. Front stand: Remove the mounting screws (two each) from the left and right stands.

Rear stand: Remove the mounting screws (one each) from the left and right stands.

Do not lose the removed screws. Do not use these screws for other purposes.

■

Attaching

1. Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the

display.

2. Align the position of the stand and screw hole on the video display.

Alight the convex part of the stand and concave part of the video display.

3. Front stand: Fix the left and right stands using the mounting screws (two each).

Rear stand: Fix the left and right stands using the mounting screws (one each).

Rear

Screen side

Front stand mounting part (inside)

Front stand

Front stand
mounting screw hole

Mounting
screw

Front stand mounting part (outside)

Concave part

Convex part

Concave
part

Rear stand

Convex part

Note

• It is recommended to mount both front stands in either the outside or inside positions.

Содержание DP-V2420













































































































Результаты поиска

Содержание DP-V2420

Отзывы:

Похожие инструкции для DP-V2420

Бренды по названию

Популярные бренды

Canon DP-V2420, Инструкция по эксплуатации

Результаты поиска

Содержание DP-V2420

Отзывы:

Похожие инструкции для DP-V2420

Бренды по названию

Популярные бренды