Canon DP-V2420 Скачать руководство пользователя страница 98 | Manualshive

Страница: 98 / 108

background image

98

Troubleshooting

Symptom

Cause and Action

"Aspect Marker", " Safety Zone Marker " or
"Area Marker" does not appear.

• A channel with no signal, unsupported signal, or with "Input

Configuration" not set may be selected. Check the signal.

The fan starts to rotate even when "Fan"
under "Camera Link" is set to "On" or
"Fan Stop" is set to "On".

• The fan operates to lower the temperature inside the main unit. The fan

stops operating when the temperature inside has lowered.

• When "Fan" under "Camera Link" is set to "On", the down time may not

match the camera.

The fan does not stop even when "Fan"
under "Camera Link" is set to "On" or
"Fan Stop" is set to "On".

• The fan does not stop if the temperature inside the main unit is high.

Configure settings after the internal temperature has lowered.

• The fan may not stop in some conditions, for example when used at a

high temperature. Use the video display at the operating temperature
(

75) or lower.

Loud fan noise

• The fan operates at a faster speed than usual to lower the internal

temperature if "Fan Control" is set to "On" and when the temperature
inside the main unit has increased. The fan operates at normal speed
when "Fan Control" is set to "Off".

• When high-luminance content is displayed continuously, the temperature

inside the main unit rises even if the operating temperature is within
the recommended range, and the fan operates at a faster speed than
usual to lower the internal temperature. It is recommended to lower the
brightness of the video display.

You forgot the password for "Protect
Settings".

• Press the jog dial and the button while the video display is in standby.

The configuration will be reset to the state where no password is set.

The video display does not start up in the
condition that the power was turned off
last time.

• Check the "Power on Setting" on the OSD menu. Set "Last memory"

to start up the video display in the condition that the power is turned off
last time.

The image quality for the User mode in
"Picture Mode" differs from the image
quality of presets.

• Select the preset mode by "Copy Picture Mode" and copy the settings.

In the "Multi View (Dual)" display, the
image quality of the screens on the left
and right differ.

• Check the settings of "Picture Mode", "Picture Function Target" under

"Channel Settings" or check the other settings for "Multi View (Dual)"
display.

«
...
96
97
98
99
100
...
»

Содержание DP-V2420













































































































Отзывы:

Нет отзывов

Похожие инструкции для DP-V2420

Бренд: Acer Страницы: 2

Бренд: Raymarine Страницы: 18

CT32HX41E - 32" COLOR TV

Бренд: Panasonic Страницы: 6

Бренд: Idmed Страницы: 28

Impulse G+ series 4

Бренд: Magnetek Страницы: 22

Бренд: Magnescale Страницы: 16

Бренд: G-Lab Страницы: 27

Бренд: NCR Страницы: 32

Бренд: Garmin Страницы: 6

Бренд: CNH Страницы: 132

Бренд: IEE Страницы: 22

Бренд: Atherton Страницы: 32

Бренд: Qardio Страницы: 32

Бренд: Omron Страницы: 42

PDK 0212-OWG13L

Бренд: IEE Страницы: 10

MultiSync FE772

Бренд: NEC Страницы: 44

Бренд: Zenith Страницы: 38

Бренд: ACRONIS Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды