3 System Connections
Attaching a Gear Ring to the Lens and Fixing the Zoom Unit
29
4.
Connect the camera head’s zoom unit cable to the terminal on the camera unit.
If the zoom unit is attached to the camera rotator’s subject side, pass the zoom unit cable through the camera
rotator to connect it.
Place the cable in such a way that it does not obstruct the operation of the zoom unit’s gear and gear ring.
5.
Lenses other than the EF100-400mm
Bundle the safety wire that you attached in step 3 with the
zoom unit cable using a cable tie.
6.
Turn the lens’s zoom ring until the wide-angle end.
Final situation after the procedure
If the lens is not initially set to the wide-angle end, it cannot be operated using the web setup tool.