Canon Color Network UFR Printer Kit-C1, Руководство по обслуживанию

Страница: 61 / 122

Chapter 2
2-9
2.1.5 MAC Address Block Function
0010-7597
Receiving MAC Address Settings
Limits network packets to receive by MAC address. To enable this function, select Additional Functions
> System Settings > Network Settings > Email/I-Fax > On for Receiving MAC Address Settings. Up to
100 MAC addresses can be registered to allow communicating with the imageRUNNER/iR. If a conflict
occurs between Receiving MAC Address Settings and IP Address Settings, Receiving MAC Address Set-
tings overrides IP Address Settings.
This function filters packets in the network layer and the reception logs for applications are not recorded.
2.1.6 URL Send
0010-7598
It is function to transmit URL information with E-Mail to be able to refer the image with remote UI. Image
preserved in box including fax box instead of transmitting.
The E-mail address where URL is notified can be set by selecting one address or one group address of each
box from the address table.
Set the notified mail address by "URL Sending" of "box specification setting."
E-mail automatically notified that the image is stored in the box of the URL sending setting ending is trans-
mitted.
2.1.7 Setting for communicate SSL
0010-7603
To communicate SSL, this machine can register the key pair and the certificate. The key pair and the server
authentication book self-signed by default have registered as DefaultKey.
2.1.8 Initialization of all data and settings
0010-7604
Purpose:
Previous devices did not have the function to erase all the user data collectively. However, the following
function was newly added: The user data in the device including the hard disk can be initialized by the
user's operation.
In order to maintain the confidential information, we provide the function to erase all the user data stored
in the iR device (image data, various logs, Address Book, Additional Functions settings, etc.) collectively.
Limitations:
a. Confirmation of the erased data
The function to confirm if all the data are erased collectively is not provided.
Verification after erasing the hard disk, such as Verification Check, is not performed.
b. Installed License key (Register information of Valid license)
It never happens that installed license key is deleted (valid license becomes invalid) by batch deletion.
In order to delete license key (make valid license invalid), Service Mode Item Used to Invalidate a License
for Transfer to a Different Device (Level 2), which is described is required.
c. Limitation of the device
When erasing all the user data collectively, LAN and FAX lines are disconnected, so you cannot access
from the outside.
d. Limitation of the job
When erasing all the user data collectively, all jobs in the device are erased.
Data to be erased
-Image data
-Address Book
-Temporary data
-Fonts and profiles which the user installed
Data not to be erased
-Counter
-SoftID(License Registraton/License key)
-Values in Service mode which are adjusted in the factory
-System software
-System data (such as the preinstalled font data)
All the data related with the printer are erased collectively. Then, the data are restored from the backup
data, so the data will be the state of the default settings. Therefore, the fonts which the user installed will
be erased.