manualshive.com logo in svg

Canon CLC1000, Руководство по обслуживанию, Страница: 77 / 627

Поделиться
Скачать
Canon CLC1000 Скачать руководство пользователя страница 77

i.

Removing the Background (adjusting the background level)

When the CCD reads the light reflected by an original, it also reads the color data of the surface of the

paper (background). In this block, the 

 of paper (background) is identified for correction of image

signals, thereby preventing fogging of white backgrounds and improving reproduction quality.

Pixels are identified as representing the background of an original if they tend to appear most frequently

in the sample image data collected during pre-scanning and, in addition, if the level of the   G, and   sig-
nals is 200 or more (Figure 3-324).

255

-

-

200

-

-

255

- - - - - -   - - - - - -  

- - .

200

-

-

.

 

 

 

 

Background pixel

Figure 3-324

“Background level adjustment” in user mode has two sub modes: mode A and mode B, each using a

different method of correction.

In mode A, only background pixels are processed; the color of the background is removed by correct-

ing the level of the RGB signal of the pixels to 255.

In mode B, the RGB signals of the background pixels are removed from the image data for the entire

image area. This way, the image on the back of the copy is removed if the copy is transparent enough to
let the back image show through.

   1997 CANON INC.

CANON 

 REV.1 MAY 1997 PAINTED IN JAPAN 

 AU 

Содержание CLC1000




















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов