manualshive.com logo in svg

Canon CLC1000, Руководство по обслуживанию, Страница: 63 / 627

Поделиться
Скачать
Canon CLC1000 Скачать руководство пользователя страница 63

b. Checking ON/OFF of the Scanning Lamp

When the scanning lamp (LA5) is ON, the lamp ON detection circuit remains ON at 

all times sending

the ON detection signal to the timer circuit.

If the scanning lamp remains ON for about 50 

 or more because of an error, the timer circuit acti-

vates the relay drive circuit to turn on the relay 

 This condition cuts the AC input and turns OFF the

scanning lamp; at the same time, the lamp error signal (LAERR) is sent to the reader controller PCB, indi-
cating 

 on the control panel.

When the relay has activated, remove the cause and turn OFF/ON the power switch to reset.
The 

 000 

is equipped with the following two types of protection functions to prevent malfunction of

the scanning lamp:

l

If the temperature inside the thermal switch exceeds 

 the thermal switch turns OFF to cut the

power to the scanning lamp.

l 

If an overcurrent flows because of a short-circuit around the scanning lamp, the fuse turns OFF,

thereby cutting off the power to the lamp regulator.

 

The thermal 

 

 is used on a DC 

 and its contact is 

 damage upon activation.

 not re-use   once it became activated; otherwise, its operation will be unpredictable.

 

 

     

 

 

     

c.

Controlling the Intensity of the Scanning Lamp

The intensity of the scanning lamp is determined by the level of the intensity adjustment signal (LINT)

from the image processor PCB.

The intensity control circuit inside the lamp regulator sends pulse signals (PWM) suited to the LINT sig-

nal to the switching circuit, which keeps turning ON and OFF at very short intervals.

The current to the scanning lamp is controlled by varying the ON/OFF intervals, ultimately controlling

the lamp intensity.

The level of the LINT signal is determined when ‘AUTO-ADJ’ under ‘CCD’ of ‘FUNC’ in service mode

is executed; thereafter, it remains the same at all times. Be sure to execute ‘AUTO-ADJ’ under ‘CCD’ of
‘FUNC’ in service mode whenever you have replaced the scanning lamp or the image processor PCB.

COPYRIGHT   1997 CANON INC.

CANON 

 REV.1 MAY 1997 

 IN JAPAN 

 AU 

Содержание CLC1000




















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов