manualshive.com logo in svg

Canon CLC1000, Руководство по обслуживанию, Страница: 5 / 627

Поделиться
Скачать
Canon CLC1000 Скачать руководство пользователя страница 5

instructions to the User

1.

2.

When making two-sided copies in manual

mode, it is important to correct the curling on

the leading edge by reversing the direction of
the curl.

The transfer medium may be any of the fol-

lowing five types:
Plain paper:

regular copy paper (80 to
105 

Thin paper:

paper thinner than plain
paper (64 to 79 

Thick paper:

paper thicker than plain
paper (106 to 163 

Extra thick paper: thicker than thick paper

(164 to 209 

Transparency:

transparency film

Special paper 1: Paper identified as such on

package

Special paper 2: Paper identified as such on

package

3.

Points to Note about Transparencies

Avoid contact with the’ copying side, by
holding at the edge.
Fan out each stack before setting it in a
cassette or the multifeeder.
Remove from the tray immediately after
copying to avoid jamming.
Keep unused transparencies in a box, and
store them avoiding high temperature and
humidity.

4.

n

Points to Note about the Orientation of
Transparencies

l

Orient each transparency so that it is fed in
the correct direction.

When Placing in a Cassette,

l

If vertical, orient it so that the white triangle

at the corner is front left 

l

If horizontal, orient it so that the white trian-

gle at the corner is front right 

Figure l-405

1. 

GENERAL 

 

n

Placing on the Manual Feed Tray

l

If vertical, orient it so that the white triangle
is front right 

l

If horizontal, orient it so that the white trian-

gle is front left 

Figure l-406

5. 

Cassette Sheet

In a high humidity environment, paper is like-
ly to become moist and will adversely affect

copying operation. If such is the case, advise
the user to place the cassette sheet on the
bottom of the cassette tray.

COPYRIGHT   1997 CANON INC.

CANON 

 REV.1 MAY 1997 PRINTED IN JAPAN 

 AU JAPON)

Содержание CLC1000




















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов