manualshive.com logo in svg

Canon CLC1000, Руководство по обслуживанию

Поделиться
Скачать
Canon CLC1000 Скачать руководство пользователя страница 273

2. 

 (original detection area/slice level)

  D O C - R E C  

  R E A D Y

  R E A D Y

Item

DA-XS
DA-XE
DA-YS
DA-YE
(Note 1)

DS-DOC
DS-PRJ
DS-OHP
(Note 1)

Description

Fine-adjusts the original detection area.

The original must be placed correctly on the 
board glass in original detection mode; if placed at an
angle, the copies will have a black frame. To prevent
the problem, set a value by which such frames will be
erased.

 

Any changes to the value will affect the frame erasing
width in original detection mode when the projector is

used.

Adjusts the slice level for original detection.

You may enter any value as the slice level for original
detection. A higher value increases detection capabili-
ty but tends to lead to wrong detection.

DS-DOC:When detecting ordinary originals,

DS-PRJ:When detecting the projection area with the
projector in use,

DS-0HP:When detecting film (6x6, 8x10) placed on

the copyboard glass with the projector in use from the

position of the reference sheet.

Remarks

Reference: 

YE=16

 (approx.)

o-31
(Density level O-248)

Reference:

Note 

The value will return to the standard value when the RAM is 

 requiring re-input. Be 

 

record any new value on the service label.

3-246

   1997 CANON INC.

CANON CCC1000 REV.1 MAY 1997 PRINTED IN JAPAN 

 AU 

Содержание CLC1000




















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды