manualshive.com logo in svg

Canon CLC1000, Руководство по обслуживанию, Страница: 141 / 627

Поделиться
Скачать
Canon CLC1000 Скачать руководство пользователя страница 141

e. Measuring the Toner by the SALT Sensor

To check the density of toner within the developer, a toner image is formed on the 

photosensitive 

after copying operation. This measurement of density is done by the SALT sensor (Figure 3-542) mount-
ed to the side of the photosensitive drum. A density pattern is formed on the photosensitive drum, and

infrared light is shone against the density pattern to measure the density with reference to the reflected
light.

Toner supply signal

-0

CL

Toner supply clutch

SALT sensor

SALT sensor

SALT sensor

SALT 

sensor

Transfer belt

Figure 3-542

The changes in the LED intensity over time

or caused by changes in ambient temperature
are corrected in the same way as for color toner.
Since the window of the sensor tends to
become soiled with stray toner, correction is
made for the dirt on the window also.

The LED is turned on during last rotation

Detection of direct light

 drum

after the Copy Start key is turned ON, and the 

Direct 

 

light reflected by the surface of the photosensi-

tive drum without a deposit of toner is read. The
difference between the measured value and the

initial value is used as a correction value when
computing the density of the density pattern.

 of reflected 

Figure 3-543

3-114

   

 CANON INC.

CANON 

 REV.1 MAY 

 PRINTED IN JAPAN 

 AU 

Содержание CLC1000




















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов