Canon C200B, Инструкция по эксплуатации

Страница: 132 / 236

Custom Picture Settings
132
3 Select the destination file and then press the joystick.
• Select an existing custom picture file to overwrite it or, if this option is available, select [New File] to save the
settings as a new custom picture file on SD card B.
4 Select [OK] and then press the joystick.
• The file on SD card B will be overwritten or a new file will be created on the SD card.
5 When the confirmation message appears, press the joystick.
Replacing a File in the Camera with a File on SD Card B
1 Select the custom picture file that you wish to replace (
A
129).
2 Open the [Load from SD Card B] submenu.
>
[
!
Custom Picture/HDR]
>
[File]
>
[Load from SD Card B]
3 Select the file with the settings that you want to replicate and then press the joystick.
4 Select [OK] and then press the joystick.
• The file in the camera will be overwritten by the one on SD card B.
5 When the confirmation message appears, press the joystick.
Embedding Custom Picture Settings in a Clip
When you record a clip using custom picture settings, you can have the custom picture file embedded in the
metadata and saved along with the clip.
1 Open the [Add
/
File] submenu.
>
[
3
$
Recording/Media Setup]
>
[Metadata]
>
[Add
/
File]
2 Select [On] and then press the joystick.
• Select [Off] to not embed custom picture settings in a clip.
Operating modes: