![background image](http://html.mh-extra.com/html/canon/bjc-s200/bjc-s200_quick-start-manual_61813047.webp)
Appendix
43
If you detect smoke, unusual odors, or strange noises around the printer, immediately
unplug the printer. To avoid fire or electric shock, never use the printer under these
conditions. Call the Customer Care Center.
•
Always grasp the plug when you unplug the power cord. Pulling on the power cord could damage the cord and
cause a fire or electric shock.
Never use an extension cord. To avoid a fire or electric shock, always plug the power cord
directly into the power outlet.
Never use a power supply voltage other than that supplied in the country where you
purchased the printer. Using incorrect voltage could cause a fire or electric shock. The
correct power supply voltage for this printer is AC 120V, 60 Hz.
Cleaning and Maintaining the Printer
Use only a slightly damp cloth to clean the printer. Never use flammable solvents like
alcohol, benzene, thinner, etc. If a flammable solvent contacts an electrical component
inside the printer, a fire or electric shock could result.
Always unplug the printer power cord before you clean the printer. If you mistakenly turn
on the printer while cleaning it, you could touch moving components inside the printer
and suffer injury.
Never attempt to disassemble or modify the printer. The printer contains high voltage
components which could cause a fire or serious electric shock.
Working Around the Printer
Never use flammable sprays near the printer. Gases in the spray could cause a fire or
electric shock if they come in contact with electrical components inside the printer.
Never insert your fingers or hands inside the printer while it is printing. The printer
contains moving parts which could cause injury.
Never place anything on top of the printer, especially metal objects (paper clips, staples,
etc.), or containers with flammable solvents (alcohol, thinners, etc.). Objects falling into
the printer could cause a fire or electric shock.
If any foreign object, especially a piece of metal or liquid, falls into the printer,
immediately unplug the printer, then call the Customer Care Center. Continuing to use
the printer after a foreign object has fallen into it could cause a fire or electric shock.
Printhead and Ink Tanks
For safety, always store printhead and ink tanks out of the reach of small children. If a
child accidentally licks or ingests any ink, consult a physician immediately.
Never subject a printhead or ink tank to shocks or excessive vibration. Shaking could
cause ink to leak and stain clothing.
Never touch the printhead or electrical contacts on a printhead immediately after
removing it from the printer. These metal parts become very hot during printing and
could cause minor burns.
Using the Printer Near Appliances and Fluorescent Lamps
•
Allow at least 6 inches clearance between the printer and another appliance or a fluorescent lamp. Electrical
noise generated by a fluorescent lamp placed too close to the printer could cause the printer to malfunction.
S200 QS.book Page 43 Tuesday, September 18, 2001 9:02 AM
Содержание BJC-S200
Страница 1: ...S200 Color Bubble Jet Printer Quick Start Guide S200 QS book Page i Tuesday September 18 2001 9 02 AM ...
Страница 4: ...iv Contents S200 QS book Page iv Tuesday September 18 2001 9 02 AM ...
Страница 55: ...S200 QS book Page 51 Tuesday September 18 2001 9 02 AM ...
Страница 56: ...S200 QS book Page 52 Tuesday September 18 2001 9 02 AM ...