Canon BJC-S200 Скачать руководство пользователя страница 31

Страница: 31 / 56

Printing Maintenance

Cleaning the Printhead

If your printed output appears faded, streaked or scratchy, the printhead may
need to be cleaned or aligned.

To clean the printhead in Windows:

With the printer on, click

Start

, then

Settings

, then

Printers

Right-click the

Canon S200

printer

icon, then select

Properties

Click the

Maintenance

tab, then

click the

Cleaning

icon.

When a confirmation message is
displayed, click

After the cleaning, print a nozzle check pattern to check the results. See
“Printing a Nozzle Check Pattern” on page 25.

If there is no change in the nozzle check pattern after cleaning, perform a
printhead deep cleaning by clicking the

Deep Cleaning

icon on the

Maintenance tab. When finished, print a nozzle check pattern to verify that
the printhead is clean.

Printhead cleaning consumes ink.
Avoid unnecessary cleaning.

Maintenance tab
appearance and
procedures may vary for
Windows XP, Me and
2000. Follow the
instructions when
prompted.

If the printhead is not clean after deep cleaning, repeat steps 1–4
two more times. If the printhead is still not clean, contact the
Customer Care Center. (See page 38.)

S200 QS.book Page 27 Tuesday, September 18, 2001 9:02 AM

Содержание BJC-S200

























































Результаты поиска

Содержание BJC-S200

Отзывы:

Canon BJC-S200, Быстрый старт, Страница: 31 / 56

Результаты поиска

Содержание BJC-S200

Отзывы: