Canon BJC-S200 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 56

Canon BJC-S200 Скачать руководство пользователя страница 2

Canon S200 Color Bubble Jet Printer Quick Start Guide.

Copyright

This manual is copyrighted by Canon U.S.A. Inc. with all rights reserved. Under the copyright laws,
this manual may not be reproduced in any form, in whole or in part, without the prior written
consent of Canon U.S.A. Inc.

© 2001 Canon U.S.A. Inc.

Disclaimer

Canon U.S.A. Inc. has reviewed this manual thoroughly in order that it will be an easy to use guide to
your Canon S200 Color Bubble Jet Printer. All statements, technical information and
recommendations in this manual and in any guides or related documents are believed reliable, but
the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended
to be, nor should they be understood to be, representation or warranties concerning the products
described.

Specifications are subject to change without notice.

All print speeds based on draft mode. Print speed will vary depending on system configuration,
software, document complexity, print mode and page coverage.

As an E

NERGY

S

TAR

partner, Canon U.S.A. Inc., has determined that this product meets

the E

NERGY

S

TAR

guidelines for energy efficiency.

All information regarding non-Canon products was compiled from publicly available information. No
representation is made regarding the accuracy thereof.

Trademarks

Canon and BJ are registered trademarks and Bubble Jet is a trademark of Canon Inc.

Canon U.S.A. Inc.
Digital Home and Personal Systems Division
2995 Redhill Avenue
Costa Mesa, CA 92626

Printed in the U.S.A.

S200 QS.book Page ii Tuesday, September 18, 2001 9:02 AM

«
1
2
3
4
...
»

Содержание BJC-S200

























































Отзывы:

Нет отзывов