manualshive.com logo in svg

Canon BJ-30, Руководство пользователя

Поделиться
Скачать
Canon BJ-30 Скачать руководство пользователя страница 45

36

Using the Printer

Chapter 3

Printing on Envelopes

You can stack up to five envelopes in the sheet feeder. U.S. Commercial
number 10 (COM10) envelopes and European DL envelopes are
recommended. You may be able to stack envelopes of other sizes in the
sheet feeder; however, Canon cannot guarantee consistent performance on
envelope sizes other than COM10 and DL.

The following envelopes are not recommended because they may cause
jams or smears, or may damage your printer:

❏

Envelopes with windows, holes, perforations, cutouts, and double
flaps.

❏

Envelopes made with special coated paper or deeply embossed paper.

❏

Envelopes using peel-off sealing strips.

❏

Envelopes in which letters have been enclosed.

When you are ready to print on envelopes, follow these steps to stack
envelopes in the sheet feeder. 

1.

Make sure the paper support is open and move the paper guide to the
left to match the width of the envelopes.

Содержание BJ-30

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды