manualshive.com logo in svg

Canon BJ-30, Руководство пользователя

Поделиться
Скачать
Canon BJ-30 Скачать руководство пользователя страница 140

Chapter 9

Installing and Using the Battery Pack

131

Installing/Using

the Battery Pack

Chapter 9

Installing and Using the Battery Pack

This chapter describes how to install and use the battery pack that comes
with the Canon Portable Kit NK-300. You can purchase the Portable Kit as
an option for your BJ-30 Bubble Jet Printer. You can also purchase
additional battery packs (NiMH Battery Pack NB-300) to use with the
Portable Kit.

The Portable Kit, which allows you to operate the printer where AC power
is not available, includes the following:

Follow these guidelines to avoid damage to your printer or battery pack,
and harm to you or others:

❏

Before using a new battery pack, charge it as described later in this
chapter.

❏

Use only the Canon NB-300 rechargeable battery pack with the BJ-30.

❏

Do not attempt to disassemble a battery pack or the battery case.

❏

Follow local regulations when disposing of a used battery pack.

❏

Do not dispose of a battery pack where it may come in contact with fire.

❏

Keep foreign objects out of the battery compartment.

❏

Do not allow metal objects to touch the power connector on the battery
case or the terminals on the battery pack.

❏

Make sure the paper support is closed when you are not using the
printer. This turns off the battery switch.

❏

Recharge the battery pack only when it is fully discharged. Charging it
before it is fully discharged reduces the battery capacity.

❏

Remove the battery pack when you are storing the printer.

NiMH BATTERY PACK NB-300

BATTERY CASE

Содержание BJ-30

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды