ｉ
Preface
ｉ
5
Warning Labels
Warning labels used for the system
During installation, operation and maintenance services, especially pay attention for the safety and
security of human. The system must only be operated following the correct operation method and
by taking care of the safety. Three (3) kinds of danger warning labels as shown below are used
for this system. Areas with these labels sticked have the individual dangers described below.
There are driving section in operation.
Do not put your fingers and hands into
inside of the panel rashly.
This would cause an accident by your
fingers and hands caught with a driving gear
and a belt.
During maintenance, do the work after
making sure that breakers of a machine and a
switch board should be shut off.
There is a possibility that a burn would
happen because of high-temperature places
inside of a machine.
During maintenance, do the work after
making sure that temperature of those places
should fall enough for safety.
Highly dangerous high-voltage parts are in
the electric system inside of the machine.
Before starting maintenance or other works,
turn off the machine and a switchboard
breakers to prevent electric shocks caused by
contacting the high-voltage parts.
