Canon Arizona 6100 XTHF Mark II Series Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 234

Canon Arizona 6100 XTHF Mark II Series Скачать руководство пользователя страница 22

Consumables, supplies and maintenance materials

WARNING

• Do not throw ink or ink containing parts or contaminated parts into an open flame.
• Do not leave ink or ink containing parts or contaminated parts within reach of children.
• Store consumables, supplies and maintenance materials away from any food and drinks.
• Be careful when handling fluids. Clean up spilled fluids immediately.

CAUTION

• Only use the materials the manufacturer recommends and that are developed for the

machine.

• Use maintenance materials and other materials for their intended purpose only.
• Ink polluted gloves are considered chemical waste and must be disposed according to local

regulations.

• Dispose of waste of consumables, supplies and maintenance materials and its packaging

containing residues according to federal, state and local regulations.

• From the point of view of occupational health and safety it is not recommended that people

who are sensitive to chemicals (e.g. people with asthma) work with ink or chemicals.

Safety and Environment Information

22

Chapter 2 - Safety Information

«
...
20
21
22
23
24
...
»

Содержание Arizona 6100 XTHF Mark II Series











































































































































































































































Отзывы:

Нет отзывов