manualshive.com logo in svg

Canon Arizona 6100 XTHF Mark II Series, Руководство пользователя, Страница: 182 / 234

Поделиться
Скачать
Canon Arizona 6100 XTHF Mark II Series Скачать руководство пользователя страница 182

Fill Coolant Bottle 

Introduction

Coolant is a used to maintain the temperature of the ink in the printheads.

It is important to check the coolant bottle, located in the Primary Ink Bay, to see if the level is low.
Keep the coolant level up to ensure proper ink temperature.

NOTE

The Accessory Pack that ships with a new printer contains a 2 litre container of coolant. During

an install the coolant system requires 1.8 litres to fill the coolant bottle and lines. We suggest

that you order more coolant from your sales representative so that you will have some when

you need to top up the system.

Procedure

1.

Unscrew the nipple from the coolant bottle lid to remove the coolant tube.

[24] Coolant Bottle is Located in the Primary Ink Bay

2.

Remove the coolant bottle from the ink bay.

3.

Unscrew the coolant bottle lid.

4.

Get the coolant fluid container that shipped with the printer.

5.

Fill the coolant bottle.

6.

Attach the lid to coolant bottle and return it to the Primary ink bay.

7.

Store the coolant fluid until it is needed again.

Fill Coolant Bottle

182

Chapter 9 - Printer Maintenance

Содержание Arizona 6100 XTHF Mark II Series











































































































































































































































Отзывы:

Нет отзывов