manualshive.com logo in svg

Canon Arizona 6100 XTHF Mark II Series, Руководство пользователя, Страница: 203 / 234

Поделиться
Скачать
Canon Arizona 6100 XTHF Mark II Series Скачать руководство пользователя страница 203

Troubleshooting and Warranty

Troubleshooting

If the Duster fails to run, and the "green" power indicator is not illuminated:
1. Check that the power cord is plugged in.
2. Check circuit breaker: requires15 Amp breaker with dedicated circuit. Do not run other large

machinery on the same circuit.

If these are OK and the Duster still does not run, contact ICA.

If the machine fails to run, and both the "green" power indicator and the "yellow" warning light
are illuminated:
1. Turn the Duster off and clean the filters

If the Duster does not restart, contact ICA.

If gauge display is blank and the machine is running: Contact ICA.

If previous "smells" return: Replace lower carbon filter.

Island Clean Air (ICA)

#101 - 326 E. Kent Avenue South Southbridge Business Park, Vancouver, B.C., Canada V5X 4N6

Telephone support: 1-800-661-8211 or 604-322-2979 Fax: 604-322-8674

(Monday to Thursday, 7:00 AM to 5:00 PM, Pacific Standard Time)

website: http://www.islandcleanair.com/contact.html

Warranty

Island Clean Air (ICA), are responsible for the Duster 3000FC warranty. In order to validate your
warranty, the Warranty registration card must be completed and returned to ICA.

You can also email warranty cards to: Island Air - Print and Graphics: Larry Miller -
[email protected]

A PDF file of the warranty cards are available from the Customer Support area of the DGS
website: : https://graphiplaza.cpp.canon

The Duster 3000FC is warranted to be free of defects in materials and workmanship for a period
of three (3) years in North America and one (1) year Rest of World, from the date of original
purchase.

This limited warranty does not include filters, cleaning or damages caused by neglect or misuse.
It will cease if the product is resold, rented or otherwise disposed of. Only factory original filters
are recommended for use with this product. The use of any other filters not specifically approved
of by ICA may affect the performance and safety of the product and will void this warranty.

In no event shall ICA be liable for any indirect, incidental or consequential damages from the sale
or use of this product. ICA does not guarantee health benefits. This applies both during and after
the term of this warranty. This warranty provides specific legal rights.

Troubleshooting and Warranty

Chapter 10 - Maintaining the Duster 3000FC Air Filtration System

203

Содержание Arizona 6100 XTHF Mark II Series











































































































































































































































Отзывы:

Нет отзывов