Canon Arizona 6100 XTHF Mark II Series Скачать руководство пользователя страница 138 | Manualshive

Страница: 138 / 234

Canon Arizona 6100 XTHF Mark II Series Скачать руководство пользователя страница 138

[17] Hold for Operator

5. Define or verify the layer definitions prior to sending the job to the printer. See section

for more information.

NOTE

Not required if the layer definitions were correctly specified in the ONYX profile or
Quick Set.

6. Submit the print job (i.e., process/rip the job).
7. Send the job to the printer and then print it.

Print a Single Layer Print Job with White Ink

For print jobs that do not use Quality-Layered mode:

NOTE

When you print white ink with print modes other than Quality-Layered, it is not recommended to

print white ink in the same area of an image as CMYK inks. The white ink does not mix well with

the other ink colors.

1. Create spot data in a design application. See

Create Spot Data in Adobe Illustrator

Create Spot Data in Photoshop

2. Open the job in ONYX workflow software using any print mode other than Quality-Layered

with an ONYX media profile that supports printing of white spot ink . (See

Thrive for White Ink

)

3. Submit the print job (i.e., process/rip the job).
4. Send the job to the printer and then print it.

Define the Layers

The Quality-Layered print mode can be used to print three, two, or one layer of image data or
printer generated flood data. All layers are independent of each other.

Quality-Layered layers are defined in ONYX media - mode options, but may be optionally
overridden within a Quick Set - Media Options, and optionally overridden on a per job basis by

Print White Ink Jobs

138

Chapter 7 - How to Manage a White Ink Workflow

«
...
136
137
138
139
140
...
»

Содержание Arizona 6100 XTHF Mark II Series











































































































































































































































Отзывы:

Нет отзывов