manualshive.com logo in svg

Canon Arizona 135 GT, Руководство по эксплуатации, Страница: 43 / 234

Поделиться
Скачать
Canon Arizona 135 GT Скачать руководство пользователя страница 43

Component

Function

Ink System
(Ink tab)

Provides various statistics about the inks. In the case of expired ink, the
ink system is disabled. It can be re-set in the module. You can bypass
the expired state within a 30 day grace period (for example, if you
know you don't need that colour in the current print job) but it is in
your best interest to replace any expired ink bags.

Maintenance
(Maintenance tab)

Displays maintenance tasks you must perform and indicates when to
do them. After you perform each task, the printer will record that the
task was completed and then calculate when the task must be per-
formed again. At that time you will be reminded that the particular
maintenance task is due.
Provides access to Auto-Maintenance where you can select which ink
channels will be purged in preparation for cleaning the printheads with
the AMS.

Counters
(Counters Tab)

Provides information about the amount of ink consumed, the amount
of media printed, total printing time, and the number of print jobs star-
ted.

Printer Settings
(Settings tab)

Displays information about, and also allows you to change various as-
pects of the printer: Date and Time, Network Connections, User Inter-
face, Printer Settings, and Roll Media Settings (if that option is instal-
led).

Service and Diagnos-
tics (Service Tab)

This area is reserved for use by trained field service technicians only.

Tools
(Tools tab)

Provides access to the Shutdown, Special prints, and Generate Log
files.

Software Updates
(Update tab)

Allows you to update the printer to the latest version of software.

Printer Interface Software

Chapter 3 - Navigate the User Interface

43

Содержание Arizona 135 GT











































































































































































































































Отзывы:

Нет отзывов