manualshive.com logo in svg

Canon Arizona 135 GT, Руководство по эксплуатации, Страница: 230 / 234

Поделиться
Скачать
Canon Arizona 135 GT Скачать руководство пользователя страница 230

Application Resources on our website

Introduction

There are many resources available on our website: Application Hints and Tips, Media
Recommendations, Media Profiles, Customer Application Bulletins, and more. To access this
information, navigate to:

"https://graphiplaza.cpp.canon/"

.

There is useful information about printing on various media.

The website also contains useful information about all recommended media and consumables.

The Customer Application Bulletins posted on the website deal with many aspects of handling
and managing media and printing with your Arizona printer.

Customer Support

The information found on our website is based on our experience with the Arizona printers. It is
offers suggestions or solutions for dealing with various situations. Since this information is
subject to change and more new material is added as it becomes available, please check the
website occasionally for the most current information.

Application Resources on our website

230

Appendix A - Application Information

Содержание Arizona 135 GT











































































































































































































































Отзывы:

Нет отзывов