manualshive.com logo in svg

Canon Arizona 135 GT, Руководство по эксплуатации, Страница: 174 / 234

Поделиться
Скачать
Canon Arizona 135 GT Скачать руководство пользователя страница 174

Clean the Automatic Maintenance System (AMS)

Introduction

Clean the Automatic Maintenance System station daily.

Equipment

• Cloth-Poly Wipe 10cm x 10cm (lint-free)
• Isopropyl alcohol (IPA)
• Flush (3010106646 Flush UV 1 litre)

Procedure

1.

Remove the cover plate by inserting an object such as the handle end of a swab into the small
hole, then slide it in the direction of the arrow on the cover, then lift it off.

2.

Select the Maintenance Tab.

3.

Select Clean AMS icon.

4.

Dip the foam end of a swab in a small container of flush.

5.

From the AMS Cleaning Assistant screen, Press Start to apply vacuum to the suction heads for 30
seconds and, while the suction is active, gently draw the swab across the top of the suction heads
to remove any ink deposits.

IMPORTANT

It is extremely important that you NOT apply too much downward pressure on the
suction head. If you press down more than 2mm (0.078in) then it will no longer
perform printhead maintenance properly. Also, if a suction head is pressed down too
far you will need to place a service call to fix it.

Clean the Automatic Maintenance System (AMS)

174

Chapter 9 - Maintenance

Содержание Arizona 135 GT











































































































































































































































Отзывы:

Нет отзывов