manualshive.com logo in svg

Canon Arizona 135 GT, Руководство по эксплуатации, Страница: 166 / 234

Поделиться
Скачать
Canon Arizona 135 GT Скачать руководство пользователя страница 166

Maintain the Printheads

Print a Nozzle Check

It is important that nozzle performance is evaluated to determine if the printer is ready for
production. To evaluate the nozzle jetting performance of each printhead the nozzle check print
must be printed.

The nozzle check print shows the performance of each individual nozzle in each colour channel.
This information is critical in determining how to proceed in recovering nozzles with automatic
maintenance system (AMS).

Procedure

1.

Place a piece of I/O paper on the printer table (or use the RMO, if available).

NOTE

The dimensions of the nozzle check print are 617.3 x 73.7 mm (24.3 x 2.9 inches).

2.

Select the Nozzle Check Print icon from the user interface. Input the appropriate settings for
printing (offsets, media thickness, lamp power, etc).

3.

Print and evaluate the Nozzle Check Print. The typical procedure for evaluating the nozzle check
print is to closely examine the jetting performance in each jetting package. Circle nozzle outs in
each jetting package with a marker to better evaluate overall performance.

Maintain the Printheads

166

Chapter 9 - Maintenance

Содержание Arizona 135 GT











































































































































































































































Отзывы:

Нет отзывов