Canon 3670C005, Инструкция по эксплуатации

Страница: 68 / 127

S etting the U s er Bit
68
Setting the User Bit
The user bit can be selected from the date or the time of recording, or an identification code consisting of
8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the
letters A to F. The user bit can be output from the HDMI OUT terminal.
Setting an Hexadecimal Code
1 Open the [U s er Bit S etting s ] s creen.
>
[
3 #
Recording Setup]
>
[User Bit Type]
>
[ Setting]
>
[
i
]
• The user bit setting screen appears with an orange selection frame on the leftmost character.
• Select [Reset] to reset the user bit to [00 00 00 00] and return to the previous screen.
2 S elect a character you want to change and then s elect [
Î
] or [
Í
] to change it a s nece ss ary.
• Change the rest of the characters in the same way.
3 S elect [OK] and then s elect [
X
].
• Select [Cancel] to close the screen without changing the user bit.
Using the Date or Time
1 S elect [U s er Bit Type].
>
[
3 #
Recording Setup]
>
[User Bit Type]
2 S elect [ Date] or [ Time] and then s elect [
X
].
NOTES NOTES
• The user bit will not be recorded with the clips recorded to the card.
Operating modes: