Canon 3670C005 Скачать руководство пользователя

Страница: 53 / 127

Image

tabilization

Image Stabilization

Use the image stabilizer to compensate for camcorder shake in order to achieve steadier shots. The camcorder
offers the following IS modes.

Standard IS (

): Standard IS compensates for a lower degree of camcorder shake, for example, for handheld

shots while you remain stationary, and is suitable for shooting natural-looking scenes.

Dynamic IS (

): Dynamic IS compensates for a higher degree of camcorder shake, such as when shooting

while walking, and is more effective as the zoom approaches full wide angle.

Powered IS (

): Powered IS is most effective when you are stationary and zooming in on far subjects using

high zoom ratios (the more you approach the telephoto end). This mode is not suitable for tilting and panning
shots.

Dynamic IS or Standard IS

elect [Image

tabilizer].

[

Camera Setup]

[Image Stabilizer]

elect [

tandard] (

tandard I

) or [

Dynamic] (Dynamic I

) and then

elect [

• Select [

Off] instead to turn off the image stabilization, for example, when the camcorder is mounted on

a tripod.

• The icon of the selected mode appears at the top of the screen.

Powered IS

Pre

and hold the POWERED I

button a

long a

you want to

activate Powered I

•

appears in yellow at the top of the screen while Powered IS is

activated.

NOTES

• If the degree of camcorder shake is too high, the image stabilizer may not be able to compensate fully.

• Powered IS is available even when [Image Stabilizer] is set to [

Off].

• You can change the operation of the POWERED IS button (long press or toggle on/off) with the

[

Camera Setup]

[Powered IS Button] setting.

• The angle of view will change when [Image Stabilizer] is set to an option other than [

Dynamic].

• When using Dynamic IS, the edges of the picture may be adversely affected (ghosting, artifacts and/or dark

areas may appear) when compensating for a high degree of camcorder shake.

Operating modes:

Содержание 3670C005
































































































































Результаты поиска

Содержание 3670C005

Отзывы:

Похожие инструкции для 3670C005

Бренды по названию

Популярные бренды

Canon 3670C005, Инструкция по эксплуатации

Результаты поиска

Содержание 3670C005

Отзывы:

Похожие инструкции для 3670C005

Бренды по названию

Популярные бренды