Canon 3433B010, Основное руководство

Страница: 8 / 52

8
Troubleshooting
Phenomenon Cause Corrective Action
Printed colors are inaccurate
Open the Top Cover and clean the Platen . After this,
manually advance the roll onto the Platen before
printing.
Color adjustment has not been
activated in the
Advanced
Settings of the printer driver.
The Printhead nozzles are
clogged.
Adjust the settings of the color management software,
referring to the software documentation as needed.
Printhead characteristics gradually
change through repeated use, and
colors may change.
Colors have not been adjusted on
the computer or monitor.
In the Windows printer driver,
Application Color Matching
Priority
is not selected.
The Platen has become soiled
because you have set Width
Detection to Off in the Control
Panel menu.
The back side of the paper is dirty The Platen has become dirty after
borderless printing or printing on
small paper.
Open the Top Cover and clean the Platen .
In the Advanced Settings of the printer driver, access
Color Settings in Color Mode to adjust colors.
Print a test pattern to check the nozzles and see if
they are clogged.
Adjust the Printhead alignment.
Refer to the computer and monitor documentation to
adjust the colors.
Click Special Settings on the Layout sheet of the
printer driver and select Application Color Matching
Priority in the dialog box.
( → , If Paper is Soiled)
( → "Checking for Nozzle Clogging," User Manual)
( → , If Vertical Lines are Warped or Colors are
Misaligned)
(
→ "Manual Adjustment to Straighten Lines and Colors
(Head Posi. Adj.)," User Manual)
Color may change slightly even
on the same model of printer if
you use a different version of the
firmware or printer driver, or when
you print under different settings or
in a different printing environment. Follow these steps to prepare the printing
environment.
Use the same version of firmware or printer driver. 1.
Specify the same value for all settings items. 2.
The Paper Retainer is soiled.
The surface of the paper is dirty Clean the Paper Retainer .
In the Control Panel menu, set Roll DryingTime to
at least 1 min.
The Paper Retainer is soiled.
You are using a paper that does
not dry easily.
( → , If Paper is Soiled)
Set Width Detection to On in the Control Panel
menu, and then open the Top Cover and clean the
Platen .
( → , If Paper is Soiled)
( → , If Paper is Soiled)
( → "Feeding Roll Paper Manually," User Manual)
Clean the Paper Retainer .
( → , If Paper is Soiled)
When paper that does not dry easily is used for
printing, it may curl during printing and touch the
output tray.
( → , Menu Map)
However, note that printing will now take longer.
(
→ , Menu Map)
In this case, in the Control Panel menu, set Scan
Wait Time to an option other than Off .