34
Error Messages
Error Message
Cause
Corrective Action
GARO Wxxxx
(x represents a
number)
There is a problem with the print
job.
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired
printing results.
GL2: Wxxxx The memory is
full.
(xxxx is 0501, 0903, or 0904)
The printer memory is full.
Because the entire print job could not be received,
the printer may not be able to print the entire original.
Check the printing results.
GL2: W0502 The parameter is
out of range.
A parameter specified in an HP-
GL/2 command is out of the
supported range.
Check the print job.
GL2: W0504 This command is
not supported.
The printer has received an
unsupported HP-GL/2 command.
Check the print job.
No ink left.
There is no ink left.
Open the
Ink Tank Cover
and replace the Ink Tank
for
which the
Ink Lamp
is flashing.
Ink insufficient.
The ink level is low, so you cannot
print, clean the Printhead
, or do
other operations that require ink.
Press
▲
or
▼
to select
Rep. Ink Tank
, and then
press the
OK
button. Replace the Ink Tank
that is low
with a new Ink Tank
.
Not much ink is left.
Not much ink is left.
Prepare a new Ink Tank
.
We recommend replacing the Ink Tank
with a new Ink
Tank
at this point if you plan to print large-format or
high-quantity jobs.
Close Ink Tank Cover
The
Ink Tank Cover
is open.
Close the
Ink Tank Cover
.
Ink tank is empty.
There is no ink left in an ink tank.
Open the
Ink Tank Cover
and replace the Ink Tank
for
which the
Ink Lamp
is flashing.
Unable to detect ink level
correctly.
The remaining ink level could not
be correctly detected.
Close the
Ink Tank Cover
.
(
→
, Replacing Ink Tanks)
(
→
, Replacing Ink Tanks)
(
→
, Replacing Ink Tanks)
The buzzer will stop once the error is cleared.
The buzzer will stop once the error is cleared.
If you have specified
ProcessingOption
>
Warning
>
On
in the
Control Panel
menu, set it to
Off
instead.
If you have specified
ProcessingOption
>
Warning
>
On
in the
Control Panel
menu, set it to
Off
instead.
In the
Control Panel
menu, setting
On-the-Fly
to
On
may enable printing. However, check the printing
results because the image may be incomplete in
some cases.
Press
▲
or
▼
to select
Continue to print
, and then
press the
OK
button to resume printing. However,
note that this error may affect the printing quality.
Содержание 3433B010
Страница 51: ......
