Canon 3433B010, Основное руководство

Страница: 48 / 52

48
Error Messages
Error Message Cause Corrective Action
Rel lever is in wrong position. The Release Lever is pushed
back.
Pull the Release Lever forward.
Roll printing is selected. You have attempted to print a test
print sheet or other printer status
information on a roll, but no roll is
loaded. Press ▲ or ▼ to select Load Roll Paper , and then
press the OK button. Load the roll, and then print.
To print on sheets, follow these steps.
( → "Loading and Printing on Sheets," User Manual)
1. Press ▲ or ▼ to select Stop Printing , and then
press the OK button to stop printing.
( → , Attaching the Roll Holder to Rolls)
( → , Loading Rolls in the Printer)
2. Load a sheet and try printing again.
Roll printing is selected, but
sheets are loaded. A print job for rolls was received
when a sheet is loaded.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button.
Press ▲ or ▼ to select Eject Cut Sheet , press the
OK button, and remove the sheet.
( → , Removing Sheets)
Load a new roll.
(
→ , Loading Rolls in the Printer)
Follow these steps to load and print on a roll.
The printer now starts printing the print job.
1.
2.
Turn off the printer and wait a while before restoring
power.
Cannot detect papr The paper has come out of the
printer.
Remove the paper and press the OK button. 1.
2. Reload the sheet, aligning it with the guide on the
right.
(
→ , Loading Sheets in the Printer)
Follow these step to reload a sheet.
2. Pull the Release Lever forward.
Follow these step to reload a sheet.
1. Push the
Release Lever back and remove the
paper.
3. Reload the sheet, aligning it with the guide on the
right.
(
→ , Loading Sheets in the Printer)